|
|
|
|
||
|
|
||
|
|
|
|
Cast formable film PA/PE 90µ
ETHYFORM® FOAE 90µ
Bottom Web - Film Bottom Web - Heat-sealable Formable Film
Bottom Web:
A standard 7-layer cast coextruded PA/PE medical web
grade, in 90 μm.Good formability and mechanical performance thanks tothe Polyamide resins.
PE-seal layer adapted to surface treated top web material.
Application:
A unique solution to reduce the cost of your most
demanding packaging designs: high seal strength, easy
run-ability, clean peel opening.
Surface treated webs run in a 10°C to 15°C operating
window depending on packaging lines.
Particularly adapted to tubings, IV sets, catheters, small
drapes and gowns materials as well as procedure kits
packed in flexible packaging and pre-filled syringes.
Material description
| FILM WEB | |||
| Product designation | ETHYFORM® FOAE | ||
| Product description | PA/PE | ||
| Recommended sterilization | EO | ||
| STANDARD TEST METHOD | UNIT | TYPICAL VALUE | |
| Thickness | ASTM D374 | µ/m² | 90 |
| Thickness | ASTM D374 | mils | 3.5 |
| Tensile strength | ASTM D882 | kN/m | 2,35 |
| Elongation | ASTM D882 | % | 400 |
| Coefficient of friction F/F | ASTM 1894 | - | 0,25 |
| Haze | ASTM D1003 | % | 4,5 |
| Gloss 45° | ASTM D2457 | % | 95 |
| Color | - | - | Transparent |